Computational Mechanics 2023

The aim of the 38th scientific conference COMPUTATIONAL MECHANICS 2023 (CM 2023) is to inform all participants and the wide scientific community about topical problems and new results gained in various fields of engineering mechanics in the last year and to extend the cooperation among academical and industrial institutions.

The conference will be held onsite in October 23 - 25, 2023 in Hotel Srní, Srní 117, Srní (see http://www.hotely-srni.cz/hotelysrni/).

The conference is organised by the Department of Mechanics of the Faculty of Applied Sciences (University of West Bohemia) under the auspices of
  • the Dean of the Faculty of Applied Sciences doc. Ing. Miloš Železný, Ph.D.,
  • the President of the Pilsen Region Rudolf Špoták,
  • the Czech Society for Mechanics,
  • the Czech National Committee of IFToMM,
  • the Central European Association for Computational Mechanics,
and with sponsorship from the company Doosan Škoda Power.

Chairman of the Scientific Committee

  • prof. Ing. Jan Vimmr, Ph.D.

Scientific Committee

  • prof. Ing. Miroslav Balda, DrSc.
    Research and Testing Institute Plzeň, Czech Republic
  • prof. Ing. Jiří Burša, Ph.D.
    Brno University of Technology, Faculty of Mechanical Engineering, Czech Republic
  • prof. Dr. Ing. Jan Dupal
    University of West Bohemia, Faculty of Applied Sciences, Czech Republic
  • prof. Ing. Václav Dvořák, Ph.D.
    Technical University of Liberec, Faculty of Mechanical Engineering, Czech Republic
  • prof. Ing. Jiří Fürst, Ph.D.
    Czech Technical University in Prague, Faculty of Mechanical Engineering, Czech Republic
  • doc. Dr. RNDr. Miroslav Holeček
    University of West Bohemia, New Technologies Research Centre, Czech Republic
  • Ing. Jaromír Horáček, DrSc.
    Institute of Thermomechanics, Czech Academy of Sciences, Czech Republic
  • prof. RNDr. Michal Kotoul, DrSc.
    Brno University of Technology, Faculty of Mechanical Engineering, Czech Republic
  • prof. Ing. Jiří Křen, CSc.
    University of West Bohemia, Faculty of Applied Sciences, Czech Republic
  • prof. Ing. Vladislav Laš, CSc.
    University of West Bohemia, Faculty of Applied Sciences, Czech Republic
  • prof. Ing. Justín Murín, DrSc.
    Slovak University of Technology in Bratislava, Faculty of Mechanical Engineering, Slovak Republic
  • doc. Ing. Milan Naď, CSc.
    Slovak University of Technology in Bratislava, Faculty of Materials Science and Technology in Trnava, Slovak Republic
  • Ing. Jiří Náprstek, DrSc.
    Institute of Theoretical and Applied Mechanics, Czech Academy of Sciences, Czech Republic
  • prof. Ing. Miloslav Okrouhlík, CSc.
    Institute of Thermomechanics, Czech Academy of Sciences, Czech Republic
  • Ing. Luděk Pešek, CSc.
    Institute of Thermomechanics, Czech Academy of Sciences, Czech Republic
  • prof. Ing. Jindřich Petruška, CSc.
    Brno University of Technology, Faculty of Mechanical Engineering, Czech Republic
  • Ing. Jiří Plešek, CSc.
    Institute of Thermomechanics, Czech Academy of Sciences, Czech Republic
  • prof. Ing. František Pochylý, CSc.
    Brno University of Technology, Faculty of Mechanical Engineering, Czech Republic
  • doc. Dr. Ing. Pavel Polach
    Research and Testing Institute Plzeň, Czech Republic
  • prof. Dr. Ing. Eduard Rohan, DSc.
    University of West Bohemia, Faculty of Applied Sciences, Czech Republic
  • prof. Ing. Josef Rosenberg, DrSc.
    University of West Bohemia, Faculty of Applied Sciences, Czech Republic
  • prof. Ing. Milan Růžička, CSc.
    Czech Technical University in Prague, Faculty of Mechanical Engineering, Czech Republic
  • prof. Dr. Ing. Milan Sága
    University of Žilina, Faculty of Mechanical Engineering, Slovak Republic
  • doc. RNDr. Petr Sváček, Ph.D.
    Czech Technical University in Prague, Faculty of Mechanical Engineering, Czech Republic
  • prof. Ing. Zbyněk Šika, Ph.D.
    Czech Technical University in Prague, Faculty of Mechanical Engineering, Czech Republic
  • prof. Ing. Michael Valášek, DrSc.
    Czech Technical University in Prague, Faculty of Mechanical Engineering, Czech Republic
  • prof. Ing. Jaroslav Zapoměl, DrSc.
    VŠB - Technical University of Ostrava, Faculty of Mechanical Engineering, Czech Republic
  • prof. Ing. Vladimír Zeman, DrSc.
    University of West Bohemia, Faculty of Applied Sciences, Czech Republic

Chairman of the Conference Organising Committee

  • Ing. Vítězslav Adámek, Ph.D.

Organising Committee

  • Ing. Alena Jonášová, Ph.D.
  • Jana Nocarová
  • Ing. Stanislav Plánička, Ph.D.

Conference Secretariat

Jana Nocarová
Department of Mechanics, Faculty of Applied Sciences
University of West Bohemia
Univerzitní 8
301 00 Plzeň
Czech Republic
Phone: +420 377 632 301
E-mail: vm@kme.zcu.cz

Conference Topics

The scientific program of the conference will contain invited plenary talks and talks in parallel sessions. The main topics of the conference are following:
  • solid mechanics,
  • dynamics of mechanical systems,
  • mechatronics and vibrations,
  • reliability and durability of structures,
  • fracture mechanics,
  • mechanics in civil engineering,
  • fluid mechanics and fluid-structure interaction,
  • thermodynamics,
  • biomechanics,
  • heterogeneous media and multiscale problems,
  • experimental methods in mechanics.
Accepted talks will be presented as lecture presentations. Each lecture room will be equipped with a data-projector and a laptop with Windows operating system.

The best works of researchers under 35 years presented during the conference will be financially awarded by the Czech Society for Mechanics.

Registration

All participants are kindly requested to register themselves by using the on-line registration form

until September 15, 2023.

After successful registration, each participant will receive an e-mail containing a unique registration ID number and password which are necessary for the submission of both the brief abstract and the 2-4 page conference paper and for the editing of registration details.

Conference Venue

The conference CM 2023 will be held in Hotel Srní, Srní 117, Srní (see http://www.hotely-srni.cz/hotelysrni/).

Transport to the Conference Venue

Given the conference venue location, a special conference bus will be dispatched providing the transport from Pilsen to the hotel Srní and back. Each participant has the opportunity to book this service during the final registration process via his/her user profile. The time and place of bus departure can be found here.

Conference Languages

The conference languages are Czech, Slovak and English with no simultaneous translation.


Západočeská univerzita v Plzni | Fakulta aplikovaných věd | Katedra mechaniky